Gibson GCG91226XA Manuel d'utilisateur télécharger pdf (Page 25)

A

B

3. Unscrew the screw and slowly pull out the

burner.

1

2

4. Release the burner injector with a 7 mm

socket spanner and replace it with a right

one.

Assemble the burner in a revers sequence.

Replace the gas type sticker near the gas

supply ramp with the one related to the new

gas type.

Adjusting the minimum gas level on the

oven burner

1. Disconnect the appliance from the

electricity.

2. Remove the knob for the oven functions.

If there is no access to the bypass screw

dismount the control panel before

adjustment start.

3. With a thin and flat screwdriver adjust the

bypass screw A.

The model determines the position of the

bypass screw A.

A

Changing from natural gas to liquid

gas

1. Fully tighten the bypass screw.

2. Put the knob back.

3. Connect the appliance to the electricity.

25

1 2 ... 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire